DIY PVC Table Stand | DIY Wedding Decor | DIY Glam Party Decor


hey guys welcome back to my channel and
if you’re new to my channel go ahead and hit the subscribe button to see more
home holiday event wedding in the area at the core today I’m gonna show you how
to make an affordable table stand for your upcoming wedding or glam event here
we go this week’s centerpiece is inspired by
the window display I saw at the mall seriously that one was actually a floor
display now hey Stan and today I’m making in a table stand instead I’ve
seen these on many many tables case for weddings and I decided to make my own so
without further ado let’s get started with the video all right guys so first
off I wanted to apologize for the quality of this video today it has been
raining in Georgia about three to four days in a row and it’s very dark in my
house and although I have lighting equipment is still very dark and I have
my ISO very high so it’s going to have you know it’s gonna be very pixelated so
I’m very sorry anyways I wanted to show you guys all the things that you’re
going to need to make your stand and I’m using half an inch pipes and connectors
and I use three pipes in total and each pipe was two dollars and 20 cents I
believe so each pipe is half an inch by ten feet and I cut them into what you
see here so there are now six of them and they are half an inch by four feet
so you’re going to need six four feet pipes okay and then with what I have
left I cut these two little pieces into three
inches so you’re going to need three inches to three inch pipes okay and then
I’m also going to be using these connectors here this are three-way
elbows and for some reason and I never find three-way elbows there are smooth
in all three openings and I have to buy the adapter in order for it to be smooth
if you don’t deal with PVC pipes you probably say what the heck are you
talking about this smooth so the pipes fits through that
very smoothly and fine but in here it has how do you think all that ripples
where you you know you connect this to I’ve been looking for you know a
three-way elbow where they’re all smooth you know three sizes so I don’t have to
buy this but I haven’t been able I’m sure I can order it online but you know
with my schedule I’m always doing things last-minute so that doesn’t work out for
me so you’re also going to need for
adapters and then you are going to need for couplings and this couplings are
half an inch on top and three quarters at the bottom yet the three quarters at
the bottom because I want the bottom to be wider I’m going to start building the
base of my stand which are going to be two of them for each side and it’s going
to consist of two glass Square cutting boards from Dollar Tree Dollar Tree also
has a round one and you can use either one it makes no difference totally up to
you and your preference and then you’re going to use two companies on each side
as so okay as you can see this is the reason why I want the couplings to be
half an inch on top and three quarters at the bottom because it’s just going to
give a little more support to the base and I’m going to glue them together with
East six thousand I’m going to apply East six thousand to the bottom of the
coupling and then I’m going to fill this in with hot glue Oh almost all the way
to the top so you can just pretty much keep it silent what the e6000 dries and
in order to figure out how wide you want your couplings to be right on top of
your cutting board you’re gonna have to grab two of your three way elbows and
your three inch pipe and you are going to connect them together okay but this
is going to be the top okay and this is the bottom and they have to match okay
so it’s going to go as so alright so just make sure then they are the same
way now I’m going to put together the top
frame and I already put one side of it together and I’m just going to do the
other one which is pretty much what I did earlier to measure so I’m just going
to grab my two 3-way elbows and I’m going to attach the adapters and then
I’m going to place my 3-inch pipe there and then the other one on the other side
alright just make sure that they are the same width and then you’re going to
attach two four footers to the openings that you see here alright guys so after
a minimum of 24 hours I’m going to place my other four footers inside of my
coupling now I’m going to go ahead and connect the top of the frame with the
base now I’m going to go ahead and paint it a metallic gold and here’s how it
looks like painted love it as far as decoration you can decorate it
however you would like you can add flowers you can add greenery you can add
both of them you can add balloons or whatever you will like it’s going to
look amazing either way on your table I’m going to decorate it in a Christmas
theme for a glam event since we’re close to the holidays and I’m definitely in
the mood for that so I’m gonna go ahead and start with the decor for the core
I’m going to be using items that I already had I’m going to be using
ornaments branch Garland’s greenery and some orchids I’m going to start with my
clear ornaments and this the ornaments where you can place a
candle inside and I’m going to be attaching all ornaments with fishing
line now I’m going to add gold and silver ornaments and here it is with the
ornaments only and I am so tempted to leave it just as it is because it looks
beautiful but I’m going to continue not going to be adding branch garland to the
top of this stand I have better quality Garland I got this
for like two dollars and 38 cents at Walmart but the garland that I have is
way too heavy because it has metal in the middle and I think I want to risk it
to have anything too heavy on top especially when you are going to have it
on top of a table so this is not so bad but not exactly the quality that I would
like and I’m going to be attaching the garland with floral wire not bad for two bucks not bad at all
now I am going to add let’s see I’m going to add my orchids first I’m going
to be using orchids from Hobby Lobby I got these a long time ago these are
recycled from other projects and I think it will look great with the color scheme now I’m going to add a little bit of
greenery leaves to give it an extra kick boom it’s gonna look great
I ended up finding another stem of work it’s and I place a little more orchid on
top and I am very happy about it but now I need a little more Sparkle so I’m
going to add smaller ornaments there it is to the top of the arrangement perfect
okay guys this is it this is my table stand that you can use for your wedding
or for any glam event here you have it as a Christmas theme well you can
definitely decorate it to your taste this is so easy to make and so so so
affordable love it I hope you guys enjoy this video and if you did please make
sure to give me a thumbs up and if you haven’t subscribe to my channel yet make
sure to do so right here right now oh so leave me a comment
what you thought my skin and you leave me a comment anyway because you know I
love to chitchat with you guys all the time and make sure we share share share
sharing is caring if you know of a friend or a family member they can use
this damn for a wedding or garden event make sure to share with them at the end
of this video alright guys until next time bye

100 Comments

Add a Comment

Your email address will not be published. Required fields are marked *